581084320672.png)
Products catagory
Last post news
Statistical Access
Online: 8
Today: 63
Month: 143
Total Access: 100537
- Mount the Roll: Insert the hexagonal screw into the small hole on the film roll. Attach the roll to the machine by rotating it clockwise.
- Stabilize the Machine: Pull out the support leg to prevent the machine from tipping over, especially when using large, heavy air bubble rolls.
- Power On: Plug in the power cord and turn on the power switch to start the machine.
- Thread the Film: Insert the air nozzle into the opening of the air bubble roll. Press the "IN" button to feed the film forward until it covers half of the guide and passes the heat-sealing bar.
- Settings (Reference):
- SPEED: 70
- TEMP (Temperature): 170
- WIND (Air Volume): 200
Press the "START/STOP" button to begin. The machine will start blowing and feeding the film automatically.
- Operation: The numbers on the screen will fluctuate as the machine heats up. It will automatically start inflating the film once the required temperature is reached.
- Note: Use high-quality, thick film rolls. Poor quality films are prone to leaking or deflating.
Related Products
